PDF
摘要
选用不同含氢量的含氢硅油,研究了含氢量和硅氢比对加成型硅橡胶印模材料固化时间和硬度等性能的影响,并通过使用高低黏度乙烯基硅油复配等方法,提高了硅橡胶的力学性能,得到了可商业化应用的硅橡胶印模材料,其操作时间为60s,固化时间为5min,固化后硬度为66A,拉伸强度为1.86MPa,断裂伸长率为52.8%。
Abstract
The effects of hydrogen content and SiH/SiVi ratio on the curing time,hardness and other properties of the silicone impression materials were investigated.The mechanical properties of silicone rubber were improved by using high and low viscosity of vinyl silicone oil and other methods.The impression materials that can be used commercially were obtained,which the operation time was 60 s and the curing time was 5min.After curing,the hardness of the material was Shore A66,the tensile strength was 1.86MPa,and the elongation at break was 52.8%.
关键词
加成型硅橡胶
/
口腔印模材
/
性能优化
Key words
additional type silicone rubber
/
dental impression material
/
performance optimization
加成型硅橡胶口腔印模材的制备及性能优化[J].
化工新型材料, 2021, 49(12): 250-252 DOI:10.19817/j.cnki.issn 1006-3536.2021.12.053
[1] 曾湫雲,温秀杰.口腔印模材料临床相关物理性能及其研究进展[J].临床口腔医学杂志,2019,35(4):248-251.
[2] 谭小凤,张叶,毕小琴.机混硅橡胶与藻酸盐印模材料在口腔修复印模制取中的应用研究[J].中国循证医学杂志,2014,14(3):268-270.
[3] 柯雯,屈直.不同印模材料取模的三维精度比较[J].暨南大学学报(自然科学与医学版),2017,38(3):269-273.
[4] 张雪娇,姚烁,赵士贵,等.硅橡胶在牙科领域中的应用[J].口腔颌面修复学杂志,2020,21(1):47-52.
[5] 罗子源,许晶晶,唐亮.用三维空间标记法测量口腔印模材料的体积变化率[J].暨南大学学报(自然科学与医学版),2014,35(6):538-542.
[6] 王文旭,黄冰玉,谈利承,等.加成型液体硅橡胶的研究进展[J].应用化学,2018,35(9):1005-1012.
[7] 周甜,解保生,蒋娟娜.三种消毒剂浸泡消毒对硅橡胶印模尺寸稳定性影响的研究[J].实用口腔医学杂志,2020,36(2):295-297.
基金资助
江西省重点研发计划项目(20192BBE50042,20202BBEL53035);国家自然科学基金(21965023,51703091);江西省自然科学基金(20181BAB216012,20204BCJL23030,20212ACB214009,20202BBEL53035)
